# How to automate GCE with Jenkins

**URL:** <https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007>\
**Category:** Greenbone Enterprise\
**Created:** [November 25, 2019, 7:17am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007 "2019-11-25T07:17:28Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![syafs](https://forum.greenbone.net/letter_avatar/syafs/32/6_449c533f586939b6e5f246632a46421f.png) [@syafs](https://forum.greenbone.net/u/syafs)\
**Post date:** [November 25, 2019, 7:17am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/1 "2019-11-25T07:17:28Z")

</div>

Stumbled upon this documentation [[https://gvm-tools.readthedocs.io/en/latest/](https://gvm-tools.readthedocs.io/en/latest/)] but it’s not clear. Is this applicable for OpenVAS GCE?  
If so, could you point towards the correct documentation/ general steps required to help us start integrating.

Your response would be greatly appreciated. Thank you.

---

<div class="post-metadata">

**Author:** ![bricks](https://forum.greenbone.net/user_avatar/forum.greenbone.net/bricks/32/46_2.png) [@bricks](https://forum.greenbone.net/u/bricks)\
**Post date:** [November 25, 2019, 7:33am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/2 "2019-11-25T07:33:40Z")

</div>

First of all there is no OpenVAS GCE. It is Greenbone Community Edition (GCE). Only the [scanner](https://community.greenbone.net/t/openvas-open-vulnerability-assessment-scanner/2623) is still called openvas.

You can use gvm-tools to do scripting within the GCE. External access from outside of the GCE is not supported.

---

<div class="post-metadata">

**Author:** ![syafs](https://forum.greenbone.net/letter_avatar/syafs/32/6_449c533f586939b6e5f246632a46421f.png) [@syafs](https://forum.greenbone.net/u/syafs)\
**Post date:** [November 25, 2019, 8:47am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/3 "2019-11-25T08:47:47Z")

</div>

Thanks for your reply.

> External access from outside of the GCE is not supported.

To clarify, does this mean we cannot integrate GCE with Jenkins, not even the GCE virtual appliance?

---

<div class="post-metadata">

**Author:** ![bricks](https://forum.greenbone.net/user_avatar/forum.greenbone.net/bricks/32/46_2.png) [@bricks](https://forum.greenbone.net/u/bricks)\
**Post date:** [November 25, 2019, 9:00am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/4 "2019-11-25T09:00:26Z")

</div>

> [@syafs](#):
>
> To clarify, does this mean we cannot integrate GCE with Jenkins, not even the GCE virtual appliance?

External access via GMP to the Greenbone Community Edition Virtual Machine isn’t supported. That’s a feature of our [GSM Products](https://www.greenbone.net/en/product-comparison/). Alternatively you can of course build you own version from the [Greenbone Source Edition (GCE)](https://community.greenbone.net/t/about-the-greenbone-source-edition-gse-category/176).

---

<div class="post-metadata">

**Author:** ![syafs](https://forum.greenbone.net/letter_avatar/syafs/32/6_449c533f586939b6e5f246632a46421f.png) [@syafs](https://forum.greenbone.net/u/syafs)\
**Post date:** [November 25, 2019, 9:29am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/5 "2019-11-25T09:29:30Z")

</div>

I see, understood. Will checkout above docs.

Thank you for your prompt response.

---

<div class="post-metadata">

**Author:** ![system](https://forum.greenbone.net/uploads/default/original/2X/4/4660e797edfaea797a8c9965246072ea26732804.png) [@system](https://forum.greenbone.net/u/system)\
**Post date:** [April 7, 2025, 10:03am UTC](https://forum.greenbone.net/t/how-to-automate-gce-with-jenkins/4007/6 "2025-04-07T10:03:22Z")

</div>

Closed on April 7, 2025, 10:03am UTC


